{"id":24273,"date":"2026-04-07T19:37:41","date_gmt":"2026-04-07T17:37:41","guid":{"rendered":"http:\/\/www.micro-trike.co.uk\/wordpress\/?p=24273"},"modified":"2026-04-07T19:37:41","modified_gmt":"2026-04-07T17:37:41","slug":"finished-at-last","status":"publish","type":"post","link":"http:\/\/www.micro-trike.co.uk\/wordpress\/finished-at-last\/","title":{"rendered":"Finished at last"},"content":{"rendered":"<p>After mulling over the ways of making some sort of curtain for the open front of my mini excavator garage I decided that the best thing to do was make a pair of full height doors. The doors did not have to be totally weather-proof. All they needed to do was stop the wind blowing rain inside and as the wind would not be blowing to force them to open &#8211; quite the reverse actually &#8211; they did not need to be of overly heavy construction.<\/p>\n<p>I had plenty of tarpaulin left over after covering the walls so I decided to cover the frames with it and then hang each one on three hinges from the front verticals. The wood was very cheap &#8211; just under 3\u20ac for each 3m length &#8211; and I reinforced the frame joints by gluing each joint and then gluing and screwing plywood reinforcements over each one made from  scrap pieces of the crate the excavator came in. I finished off hanging the doors working in blistering heat over a very long day yesterday and the results are shown below.<\/p>\n<p><a href=\"http:\/\/micro-trike.co.uk\/images\/garage_minipelle52.jpg\"><img decoding=\"async\" src=\"http:\/\/micro-trike.co.uk\/images\/garage_minipelle52_s.jpg\" alt=\"null\" \/><\/a><\/p>\n<p><a href=\"http:\/\/micro-trike.co.uk\/images\/garage_minipelle53.jpg\"><img decoding=\"async\" src=\"http:\/\/micro-trike.co.uk\/images\/garage_minipelle53_s.jpg\" alt=\"null\" \/><\/a><\/p>\n<p><a href=\"http:\/\/micro-trike.co.uk\/images\/garage_minipelle54.jpg\"><img decoding=\"async\" src=\"http:\/\/micro-trike.co.uk\/images\/garage_minipelle54_s.jpg\" alt=\"null\" \/><\/a><\/p>\n<p>It was tricky getting the doors to line up as the garage hasn&#8217;t been constructed on totally level ground. Nevertheless they didn&#8217;t come out too badly. The bolt I bought is far too small and securing it, although not easy, is possible. To make it even easier I&#8217;ve ordered a couple of flip-over latches that I&#8217;ll place above and below the bolt which will align the door fronts better and make securing the bolt easier. I&#8217;ve also got some very short nails which I&#8217;ll use to secure the tarp to the outsides of the door frames and that really will be it.<\/p>\n<p>The garage really has turned out out to be a very nice, weatherproof shelter and will, I hope, be worth all the work when the weather deteriorates and the winds blow, as they undoubtedly will. I&#8217;ll now be able to finish greasing up the excavator (I&#8217;m waiting for some lithium grease to be delivered), change it&#8217;s engine oil for what I know is good quality stuff and be able to start using it. And not before time \ud83d\ude42<\/p>\n<!-- AddThis Advanced Settings generic via filter on the_content --><!-- AddThis Share Buttons generic via filter on the_content -->","protected":false},"excerpt":{"rendered":"<p>After mulling over the ways of making some sort of curtain for the open front of my mini excavator garage I decided that the best thing to do was make a pair of full height doors. The doors did not have to be totally weather-proof. All they needed to do was stop the wind blowing &#8230; <a class=\"read-more\" href=\"http:\/\/www.micro-trike.co.uk\/wordpress\/finished-at-last\/\">Read more<\/a><!-- AddThis Advanced Settings generic via filter on get_the_excerpt --><!-- AddThis Share Buttons generic via filter on get_the_excerpt --><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[5],"tags":[],"class_list":["post-24273","post","type-post","status-publish","format-standard","hentry","category-main-blog"],"_links":{"self":[{"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/posts\/24273","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/comments?post=24273"}],"version-history":[{"count":4,"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/posts\/24273\/revisions"}],"predecessor-version":[{"id":24277,"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/posts\/24273\/revisions\/24277"}],"wp:attachment":[{"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/media?parent=24273"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/categories?post=24273"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.micro-trike.co.uk\/wordpress\/wp-json\/wp\/v2\/tags?post=24273"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}